Customer Comments: Outside fireplace needs screen door that can be removed.
Our Comments: A Free standing screens with doors that is easily removable may not be practical for your fireplace due to the short ledge. We cannot make the legs long enough for the screen to be stable when the doors are open, so it would need to be attached at the top (not easily removable). Below are some options for your consideration.
Tempered vs Ceramic Glass: Tempered glass can handle sustained temperatures up to about 450F without breaking from heat and should be at least 8” from the flames. Ceramic glass can handle temperatures up to about 1450F and can have direct contact with the flames. If you wish to burn fires with the doors closed, I highly recommend upgrading to ceramic glass.
Fireplace Opening: Unknown
These must be attached, but are much sturdier and better built than free standing options. They can be made with just mesh doors or you can have glass doors with gate mesh backup doors behind the glass. Ceramic glass doors are beneficial when it gets windy as they allow you to continue burning the fire with the doors closed to prevent sparks and smoke from flying about.
Please provide the dimensions per the diagram below
W - Width:
LH - Left Height:
CH - Center Height:
RH - Right Height:
D – Depth of Ledge:
If you are planning on burning anything in your fireplace, you need to have mesh behind the glass so you can burn a fire with the doors open. You can chooe between gate mesh backup doors and sliding mesh curtains. Functionally, gate mesh performs the best as the wire has smaller holes that sparks cannot get through. Aesthetically, mesh curtains may be preferred because they do not have a vertical center frame that obstructs the view of the fire. When you are not using the fire or you want a complete unobstructed view, they do not stick out like gate mesh doors when they are opened.
We are showing these options on a flat steel bifold door with a satin brass overlay and gray glass.
Scale & Finish Disclaimer: Mockups shown on this site are not necessarily to scale and are meant to help you choose the style of your screen or door. The appearance of finishes represented may vary between digital monitors and screens. I do my best to recommend finishes that I believe will blend with your decor and flatter your fireplace. You can view finish options here:
Hearth Creations Finishes
Design Specialties Finishes
Stone Manufacturings Trims & Finishes
Samples for some finishes are available upon request.
"I have a passion for designing custom fireplace treatments, and have been doing so for over 35 years. The designs I create are not only tailored to fit perfectly, but fashioned to compliment your room decor and turn your fireplace into a tastefully finished focal point. Take advantage of my Free Design Service and let me show you the possibilities." Here are just a few reasons why you might consider buying from me:
Greg Tillotson (Owner/Designer)
![]() |
![]() |
Stone Manufacturing is in the process of moving their production facility and is not taking orders until the first or second quarter of 2016. If you are interested in any products made by Stone Manufacturing, please send an email to: greg@fireplacetreatments.com with subject "Stone Mfg Waiting List" and we will contact you when they are back up and running, so you can be one of the first in line.