Custom Screens with Magnets for Westin Indianapolis Ten Hands Bar Fireplace - Project #11562

Lobby Fireplace | Ten Hands Bar Fireplace

Customer Comments: See Lobby Fireplace original comments.

Our Comments: Here is an example of how we might treat the Ten Hands Social Bar and Eatery at the Westin Indianapolis. We would provide channels that will attach to the glass on the sides with rubberized pressure screws. These channels will help support the upper glass panel that may have a tendency to sag. The screen will attach to the channels with magnets.

Fireplace Opening: 83" W x 29" H

Before

Before:

Magnetically Mounted Linear Fireplace Screens

These high quality screens will be attached to angle glass mounted channels with magnets. A heavy gauge mesh will be used to resist being dented. They are made in such a manner that the wire mesh can be replaced if it gets damaged.

Single Panel Screen

Option #1A: Stone Manufacturing 1P30M Magnetic Mounted Single Panel Fireplace Screen in Pewter (satin nickel plated steel).

Single Panel Screen

Option #1B: This shows the satin nickel plated steel channels mounted to the glass.

Other Pictures

Fig #1 - Room Setting

Glass Door Mesh Options

If you are planning on burning anything in your fireplace, you need to have mesh behind the glass so you can burn a fire with the doors open. You can chooe between gate mesh backup doors and sliding mesh curtains. Functionally, gate mesh performs the best as the wire has smaller holes that sparks cannot get through. Aesthetically, mesh curtains may be preferred because they do not have a vertical center frame that obstructs the view of the fire. When you are not using the fire or you want a complete unobstructed view, they do not stick out like gate mesh doors when they are opened.

We are showing these options on a flat steel bifold door with a satin brass overlay and gray glass.

No Mesh

Gate Mesh Backup Doors

Mesh Curtains

Glass Options

Tempered vs Ceramic Glass: Tempered glass can handle sustained temperatures up to about 450F without breaking from heat and should be at least 8" from the flames. Ceramic glass can handle sustained temperatures up to about 1450F and be in direct contact with the flames. If you wish to burn fires with the doors closed, I highly recommend upgrading to ceramic glass. Ceramic glass is $800-$2000 more than tempered glass depending on the manufacturer.

Not all doors are available with all of these glass options.

Ceramic

Tempered Clear

Tempered Gray

Tempered Bronze

Tempered Black (Opague)

Tempered 1/2" Bevel

Tempered 1" Bevel

FREE DESIGN SERVICE
Get Free Mockups and a Price Quote

Fill Out The Form Below

or Email: greg@fireplacetreatments.com

INSTRUCTIONS: Send me your pictures and I will create mockups that show how custom made fireplace screens or doors will look in your home. There's no better way to find the perfect treatment for your fireplace. I also do mockups for gas logs!

We Need These 2 Photos:

Photo #1: With your camera sideways, take a picture directly in front of the fireplace from far enough away to see the entire fireplace floor to ceiling like this.

Photo #2: With your back to the fireplace, take a picture looking straight out into the room so we can see the decor directly in front of the fireplace.

10 to 500 characters required (0)

Photos: Use the buttons below to upload your photos.

Photo #1:

Photo #2:

Add an extra photo of your choice (not required)

Photo #3:

Submit

Privacy Note: Your privacy is very important to me. I will never divulge your email address or contact information to any entity outside of my company unless necessary to process your order. I reserve the right to post your pictures on my website along with your comments so others can view your project for ideas. In any case, I will not post your last name or contact info on this website. By using my design service, you are giving me all rights to post your photos and comments on any of my websites and marketing materials.