Customer Comments: I am looking for bifold doors or tracked bifold doors, ideally with an interior frame (if such a thing exists) rather than an exterior frame due to the firebox being set back 5 3/4" such that the folded doors at a right angle would only protrude about 4" onto the hearth. I am looking for doors that have a pattern on them rather than just open glass and in stainless steel. I like door design DXF-36. The opening is 37 7/16 inches wide by 26 1/2 inches high. It's been converted to gas logs.
Our Comments: Here's your fireplace might look with the DXF-36 Patterned Fireplace Door in Stainless Steel or Satin Nickel.
Fireplace Opening: 37 7/16" W x 26 1/2" H
These doors are made from 3/16" thick solid steel or stainless steel with a laser cut pattern. The mockup has been created using a portion of the pattern shown below. The manufacturer will crop the pattern to fit the dimensions of the door as closely as possible to replicate the mockup. We will then provide you with a CAD drawing for final approval prior to production.
If you are planning on burning anything in your fireplace, you need to have mesh behind the glass so you can burn a fire with the doors open. You can chooe between gate mesh backup doors and sliding mesh curtains. Functionally, gate mesh performs the best as the wire has smaller holes that sparks cannot get through. Aesthetically, mesh curtains may be preferred because they do not have a vertical center frame that obstructs the view of the fire. When you are not using the fire or you want a complete unobstructed view, they do not stick out like gate mesh doors when they are opened.
We are showing these options on a flat steel bifold door with a satin brass overlay and gray glass.
Scale & Finish Disclaimer: Mockups shown on this site are not necessarily to scale and are meant to help you choose the style of your screen or door. The appearance of finishes represented may vary between digital monitors and screens. I do my best to recommend finishes that I believe will blend with your decor and flatter your fireplace. You can view finish options here:
Hearth Creations Finishes
Design Specialties Finishes
Stone Manufacturings Trims & Finishes
Samples for some finishes are available upon request.
![]() |
![]() |
Stone Manufacturing is moving their production facility and will not be taking any new orders for the next few months. If you are interested in any their products featured on this website, please email: greg@fireplacetreatments.com with subject "Stone Mfg Waiting List" and we will help you find the best alternative or contact you when they are back up and running.